
Van Conversion Power Kit with PWM Charge Controller - Solar Panels and Batteries Separate Purchase Giving You Many Options
This Van Conversion Power Kit is simply the whole package without the solar panels and batteries, allowing you to choose what size panels and how many watts you need for your van. We've also not included Lithium batteries with this kit for those who want to use a different type of battery or who have recently purchased batteries. This power kit includes tried and tested products including Magnum Energy Pure Sine Wave 2000 Watt Power Inverter/Charger, Zamp 30 Amp 5 Stage PWM Charge Controller, and all the additional parts, cabling and wiring to make it easy to install with no additional parts needed.
The only decision you need to make is how many and what size solar panels you need for your installation. Add them to your order by checking the box next to the panel(s) you need under "Add Accessories" located under the Add to Cart" button
We recommend 180 watts up to 510 watts of solar panels for this van power kit. We suggest verifying the solar panels you order will fit your roof space by laying out cardboard cut to the size(s) of the panels you want to add. Allow an inch on each side of the panels for mounting feet.
This van power kit is perfect for the DIYer that has some intermediate level skills. We include instructions with every van conversion kit, wiring diagram and labels to mark your cables and wires when complete.
This kit comes with a Sidewall Port to be used with a Zamp Solar 140 Portable Unregulated (additional purchase) for more power if needed.
Van Conversion Power Kit with MPPT Contents:
- Zamp 3 Port Roof Cap, 25 ft. of 8 Ga wire, wire connector kit and 40 amp auto breaker.)
- Zamp 30 Amp Digital Deluxe PWM Charge Contoller
- 1 Magnum Energy MS2012-20B 2000 Watt Pure Sine Wave Inverter/Charger (This unit has two built-in 20 amp breakers that eliminate the need for a breaker box.)
- Magnum Energy RC50 Digital LCD Display Remote Panel
- ME-RC-BZ Magnum remote display wall mount
- 1 2000 Watt Inverter Installation Kit (2 - 6 ft 2/0 cables and 300 amp fuse with holder)
- 1 Victron BMV-712 Smart Battery Monitor with Bluetooth
- 2/O Battery Crossover Cables - 1 set (9" end to end)
- 1 Battery Disconnect
- 1 Connector Kit (cable and wire connector ends with shrink tubing)
- 1 RV 30 amp inlet for shore power
- 2 tubes Dicor Sealant
- 1 Fuse Box - 12 Space (for your lighting, fan, fridge, etc.)
- 10 ft. 6 Ga Wire Negative ( for neg shunt load side to fuse box to chassis ground)
- 5 ft. 6 Ga Wire Positive (300 amp positive input side to cut off switch and cut off switch to fuse box)
- 10 ft. 10/2 wire with ground 120V (from 30 amp shore power plug to inverter input)
- 1 ZS-RT-1 (remote display for solar charge controller)
- USB & power port
- 1 Y-connector for USB & power port to fuse box
- 20 ft. 12/2 wire with ground 120V (for outlets - goes from two inverter 120 output connections to your 120 volt outlets)
- 1 Zamp Sidewall Port