Complete Van Conversion Solar Kit 230 Watt with Zamp Solar USA Made Panels, Magnum Power Inverter, MPPT Controller & Lithium Batteries
We've put together a complete Van Conversion Solar Kit 230 Watt for camper vans and van conversions and overlanders using the best products on the market including Zamp Solar panels and Magnum Energy Pure Sine Wave 2000 Watt Power Inverter/Charger. This complete camper van solar kit comes with two Zamp 115 Watt solar panels, a Magnum Energy Pure Sine Wave 2000 Watt Inverter/Charger, two 100 Ah Battle Born Lithium Batteries, Victron Smart Solar MPPT Charge Controller and all the cabling and wiring needed to successfully install this kit.
This van solar setup is perfect for the DIYer that has some intermediate level skills. We include instructions with every van solar kit, wiring diagram and labels to mark your cables and wires when complete.
This 230 Watt Van Kit includes two 115 watt solar panels with a smaller footprint for vans with limited roof space and a Zamp Sidewall Quickport to be used with a Zamp Solar 140 Portable Unregulated (additional purchase) for more power if needed.
Van Conversion Solar Kit 230 Watt Contents:
- 2 Zamp 115 Watt USA Made Solar Panels and mounting feet
- Zamp 3 Port Roof Cap, 25 ft. of 8 Ga wire, wire connector kit and 40 amp auto breaker.)
- Victron Smart Solar MPPT Charge Controller 150/35
- 2 Battle Born 100 Ah Lithium Batteries
- 1 Magnum Energy MS2012-20B 2000 Watt Pure Sine Wave Inverter/Charger (This unit has two built-in 20 amp breakers that eliminate the need for a breaker box.)
- Magnum Energy RC50 Digital LCD Display Remote Panel
- ME-RC-BZ Magnum remote display wall mount
- 1 2000 Watt Inverter Installation Kit (2 - 6 ft 2/0 cables and 300 amp fuse with holder)
- 1 Victron BMV-712 Smart Battery Monitor with Bluetooth
- 2/O Battery Crossover Cables - 1 set (9" end to end)
- 1 Battery Disconnect
- 1 Connector Kit (cable and wire connector ends with shrink tubing)
- 1 RV 30 amp inlet for shore power
- 2 tubes Dicor Sealant
- 1 Fuse Box - 12 Space (for your lighting, fan, fridge, etc.)
- 10 ft. 6 Ga Wire Negative ( for neg shunt load side to fuse box to chassis ground)
- 5 ft. 6 Ga Wire Positive (300 amp positive input side to cut off switch and cut off switch to fuse box)
- 10 ft. 10/2 wire with ground 120V (from 30 amp shore power plug to inverter input)
- USB & power port
- 1 Y-connector for USB & power port to fuse box
- 20 ft. 12/2 wire with ground 120V (for outlets - goes from two inverter 120 output connections to your 120 volt outlets)
- 1 Zamp Sidewall Port
